Smooth, almost effortless finish – Cut my job time in half!
I've done my share of drywall patching over 30+ years as a home-owner, but it's always been with a shorter broad knife that never gave me the flawless result I was hoping for. The trouble is, a short spreader just can't taper and feather out the drywall compound like a long blade can. So when I recently had a pipe leak, resulting in wet drywall that needed to be cut out and patched, I decided to try this PLONIC 24-inch drywall skimming blade. It's safe to say, this tool made what would have been a painful process surprisingly smooth. It worked like a charm for both skim coating flat mud over the entire patch, and then knocking down and feathering out heavier areas. I was able to create an ultra-smooth finish with minimal sanding required. After painting, the patch was invisible.
Aside from its good length, this blade is also well made. The extruded aluminum backbone feels solid and doesn't flex or bow in the center. That rigidity is critical when you're spanning 24 inches across a wall; it keeps pressure uniform across the full length. But also having a 0.5mm stainless steel blade thickness is spot-on. It has just enough flex to smooth compound without digging into the wall, but it’s sturdy enough that you won't get uneven lines or lap marks. I appreciate that the blade comes with a plastic blade guard for storage; if you get one nick in a smoothing blade, it's ruined. The ergonomic round-grip handle feels comfortable in hand and gave me great tactile control over the blade angle.
Cleanup is as quick and easy as any other stainless steel blade; I just rinsed it and wiped it dry. Stainless steel won't rust if cleaned and dried properly.
A minor note: The 24" size requires decent arm/wrist strength when working on a vertical surface, and I would imagine even more so working overhead. Also, it requires a small learning curve if you've never used a wide skimming blade. This was the case for me.
Overall, this is an excellent drywall skimming blade that offers great value for both DIYers and professionals. It will be my go-to finishing tool, and I would definitely recommend it.
+4
Great Skimming Blade for Large Areas
The Plonic 24inch Stainless Steel Blade Skimming Blade is huge. It is great in wide open spaces like ceilings but much too unwieldy in congested areas. It is rather sharp and has a protective cover for the edge. It has a hole on the end for easy storage. The handle has sealed end caps that prevent mud from getting into the handle and makes for easier cleaning.
It takes a little getting used to. It fits nicely in my hand and is comfortable to use. It makes large areas much faster to finish. The blade doesn’t flex as much as other blades. Recommend.
Excellent 24 Inch Drywall Skimmer, Bigger Really Is Better
I am slowly becoming a skimming expert, mostly because I have had no choice. My condo was built in the mid 1980s and a lot of the walls still had the original wallpaper on them. My wife and I have been removing it little by little, only to discover that whoever installed the wallpaper apparently decided that drywall needed absolutely no protection whatsoever. The wallpaper was applied directly to the drywall without a skim coat, primer, or any kind of protective layer between the paper and the wallpaper.
Naturally, removing that wallpaper has taken a fair amount of the drywall paper with it, leaving gouges, torn areas, and plenty of imperfections that have to be repaired. In some cases I have had to replace sections of drywall, and in others I have had to seal the exposed fibers with the appropriate products before moving forward. After that, the next logical step is skim coating the entire wall, which I have now had to do on every surface where I have removed wallpaper.
I already have a very nice 18 inch drywall skimmer, and it works quite well. I have always looked at the larger 20 plus inch skimmers, though, because when you are working on a large wall, bigger really does seem to be better. That is why I was particularly excited to get this 24 inch model.
One of my favorite ways to skim coat is to use an old paint roller to spread the joint compound across the wall and then come back with a good skimming blade to flatten everything out. With a 24 inch blade, I can cover considerably more area with each pass and hopefully get a smoother finish with less work. I also prefer doing multiple thinner coats rather than trying to make one heavy coat do everything, and a large skimmer like this makes that process much easier.
The construction of this particular skimmer is excellent. The entire body and blade are made from extruded aluminum, and the rigidity is immediately apparent when you hold it. There is essentially no flex in the blade, which is exactly what you want when you are trying to pull joint compound tight across a large wall. A flexible blade can create uneven pressure and make getting a flat finish considerably more difficult.
The round handle is probably my favorite design feature. Most drywall skimmers I have used have a thin square style handle that can become uncomfortable after a while. This one has a full round aluminum handle that fits naturally into the palm and gives you a much better grip. It also distributes the pressure across your hand instead of concentrating it against your fingers, which should reduce hand fatigue during longer jobs.
Everything about it feels like a professional piece of equipment rather than a cheap DIY tool. The blade is straight and precisely machined, the handle is comfortable, and the sealed end caps should keep joint compound out of the body while also making cleanup easy. From what I can see, you should be able to rinse this thing off quickly once you are finished working.
The 24 inch size is definitely the main attraction for me. When you are skimming a large wall, covering more surface area with each pass makes the process much more efficient, and it should help reduce the amount of unnecessary sanding afterward. If you are doing level 5 type finishing work or simply trying to get a very flat surface before painting, I think the rigidity and width of this blade are major advantages.
Overall, I am extremely pleased with it. The design is excellent, the construction is excellent, and the size is exactly what I have been looking for. If you are doing a lot of drywall finishing, plaster work, or large skim coating projects, I think this is a very worthwhile tool to have. It is also reasonably priced considering the size and construction. In my experience with skimming, bigger really is better, and this 24 inch skimmer is exactly the kind of tool I would recommend for tackling large walls efficiently and getting a smooth, professional looking finish.
+3
Very easy to use ergonomically designed handle
This skimmer has a very nice comfortable curved hand grip with a very long, smooth straight edge. That’s reinforced with a radial edge. Comes with a protective rubber edge against the blade. Also has a loop on the top end to make it easy for storage and hanging up on the shelf allows for a very nice smooth application. Large 32 inch blade.
The Round Grip Really Does Make a Difference
The 32-inch size is useful for skim coating larger wall sections, smoothing wide butt joints, blending compound, and knocking down light ceiling texture. It covers a lot of area with each pass, and the stainless blade with the rigid aluminum body feels well made and stays straight while I am making longer pulls. The quality is definitely there.
I already own skimming blades in just about every size, so I was curious whether the round grip handle on this one would actually make much difference. After using it, I can say it is not a gimmick. The handle changes the feel of the blade in a good way, giving me a more substantial and comfortable grip that lets me pull the mud back tighter and with better control than some of my standard flat-handle blades.
The round handle does come with a couple of tradeoffs to consider. It does not fit any of my existing extension poles, so I would still use one of my traditional blades for high walls or ceiling work that requires a pole. It also does not lay flat, which means it takes up a little more room in the gun case where I store my blades. Neither issue takes away from how well the blade works in hand, but they are worth knowing if you already have a pole system or compact storage setup.
Overall, I really like the round-grip design and would use it again for wide wall work where I can work by hand. If you want a quality skimming blade with a grip that gives you better control while pulling compound, this is a great option—just be aware that the handle design has some tradeoffs.
+1
Large-Surface Drywall Blade That Delivers Smooth Results
This 32-inch skimming blade covers a lot of ground quickly and feels solid in the hand. The rigid extruded aluminum body stays straight under pressure, while the thin 0.5mm stainless steel blade glides smoothly for clean skim coats and knockdown finishes. The round grip handle is comfortable and well-balanced, making it easy to control even on large walls and ceilings without hand fatigue.
The look is professional and clean, with a black handle that contrasts nicely against the shiny stainless blade. Materials feel high-quality—the aluminum body is rigid with no flex, and the stainless edge holds up well without bending or dulling easily. Cleanup is straightforward, and the overall construction gives a durable, job-site ready feel.
At this price the value is excellent. You get a wide, well-made tool that speeds up finishing work on big surfaces and produces consistent, smooth results. It is worth every penny for anyone tackling larger drywall or plasterboard projects.
+3
32" straight edge! Great for floating.
This is a must-have for any good drywall crew. Well, let me rephrase that a great drywaller can do almost anything with this 6-in knife. But if you're a DIY or a mediocre drywall finisher, like me, and this tool is excellent for floating large repairs or large areas that that uneven or different heights.
I also have an 18-in and 24-in floating blade like this.
One thing, these things really come in handy for is floating or skimming an entire wall. When you're trying to cover up an old texture and change to a new texture style. This allows you to make large passes and is pretty comfortable in the hand with the ergonomic grip.
+2
One Piece Aluminum Drywall Skimming Blade
My husband does remodeling for a living and with absolutely thrilled with this drywall skimming blade. This is a one piece, all aluminum blade which he says makes it much better. I take it that it is stronger. He has bought this brand before and always thinks they have high quality tools.
My new favorite texturing tool
This skimming blade works really well. I am finishing my basement and bought this blade to add a subtle texture to my walls. Most of the walls upstairs are smooth but have occasional textured areas, and I was trying to match that look.
On my last house, I used a 6-inch drywall knife to apply texture, but it took forever. I constantly had to blend into the existing mud, and when I was working quickly, I would often leave lines at the edges of the blade. Fixing those lines usually meant additional blending, which often smoothed the texture too much and ruined the look I was trying to achieve. More than once, I ended up scraping the mud off the wall and starting over.
The longer length of this skimming blade makes blending much easier and often eliminates those edge lines altogether. The larger surface area helps create a smoother, more consistent finish.
I also love how comfortable the blade feels in my hands. I can use it one-handed with light pressure for smaller touch-ups, or use both hands to spread and smooth mud over a larger area in a single pass. The blade has just the right amount of flex—not too stiff and not too floppy.
Cleaning this tool right after use was also easy. Spraying it down with a hose and wiping off a couple of stubborn spots with my fingers makes it look brand new after every use. I still dry the blade after each rinse, but it appears to be made of high-quality stainless steel, and I doubt it would rust even if I neglected it.
I should have taken pictures before I painted my walls, but the results were exactly what I was looking for. This skimming blade saved me a lot of time and frustration, especially as someone who is not a professional drywall finisher. In the right hands, it might just be the perfect blade.
+1
